NXP i .MX6 Dual Lite Embedded Board

Overview

The i.MX 6DualLite family features dual cores running up to 1.0 GHz with 512 KB of L2 cache, and 64-bit DDR3 or 2-channel, 32-bit LPDDR2 support. It has integrated FlexCAN and MLB busses, PCI Express, LVDS, and support for MIPI cameras and displays as well as HDMI v1.4.

A7M04608.JPG
Block Diagram
Block Diagram
press to zoom
A7M04617
A7M04617
press to zoom
A7M04614-1
A7M04614-1
press to zoom
A7M04609
A7M04609
press to zoom
A7M04608
A7M04608
press to zoom
A7M04607
A7M04607
press to zoom

Feature

● 100mm x 100mm x 1.6mm

● NXP Cortex™-A9 i.MX 6 Dual Lite 1GHz processor

● 1GB DDR3 on board. (2GB optional)

● 8GB eMMC on board. (16GB/32GB optional)

● microSD card slot

● 18/24 bit Dual channel LVDS (up to 1920 x 1080)

● MIPI DSI x2 lanes (Optional)

● Parallel 24Bit (Optional)

● HDMI V1.4 (1920x1080)

● MIPI CSI-2 x2 lanes (Optional)

● UART Interface:

    • UART1 (TX/RX only, debug console)

    • UART2 (TX/RX only)

    • UART3 (TX/RX/CTS/RTS)

    • UART4 (TX/RX only)

    • UART5 (TX/RX/CTS/RTS) (Optional)

● CAN bus x 1 (UART2)

● I2C touch x 1

● Gigabit LAN

● 3W stereo class-D speaker amplifier

● Line in, Line out (Optional)

● USB Interface:

    • USB OTG x1 (host/slave: jumper selection)

    • USB host x 2

    • USB host x 5 (Optional)

● M.2 (optional)

● RTC backup Function: Yes

● 26 GPIOs, x14 output, x12 input, 3.3V IO level

● Edge Connectors:

    • 1 x DC Jack (Optional)

    • 1 x HDMI connector

    • 1 x USB connector 

    • 1 x microSD card slot

    • 1 x RJ45 connector

● Onboard Headers / Connectors

    • 1 x 1*2 DC in 12V header

    • 1 x 15 pin MIPI DSI FFC connector (Optional)

    • 1 x 15 pin MIPI CSI FFC connector (Optional)

    • 1 x 1*5 Touch pin header

    • 1 x 2*15 LVDS pin header (Dual channel, 24bit)

    • 1 x 1*2 RTC battery cable wafer box header

    • 2 x 1*2 Stereo speaker wafer box header

    • 1 x 2*3 Line In/Out pin header (Optional)

    • 1 x 2*5 USB pin header for 2 USB ports 

    • 2 x 2*5 USB pin header for 4 USB ports (Optional)

    • 1 x 1*4 USB pin header for 1 USB port (Optional)

    • 1 x 1*4 Buzzer pin header (Optional)

    • 4 x 1*4 UART pin header x4

    • 1 x 1*4 UART pin header x1 (Optional)

    • 1 x 30 pin 24Bit Parallel Display FFC connector (Optional)

    • 1 x 2*15 GPIO pin header

    • 1 x 2*3 Power Key/Reset Key pin header (Optional)

    • 1 x Firmware download button

● Operation Temperature : 0°C ~ 60°C

● Storage Temperature : -20°C ~ 70°C

● Relative Humidity : 10% ~ 90% (non-condensing)

● System Power Input : 12V

● OS Support : Linux, Android