POS S500-POS
Overview
The S500-Pos is a high performance, credit card sized computer. It is powered by ACTIONS semiconductor's 32-bit CPU that is designed to everything you'd expect a desktop computer to do, like software development, prototyping, playing high-definition video, or making spreadsheets. It also has the ability to be customized in all variety of specified application such as Internet of Thing (IOT) products, robotics, sensor hub, automation, and much more.
Feature
● 145mm x 105mm SBC board
● ARM A9R4 CPU
● Quad Core, 1.6GHz, 28nm LP process
● HPI PowerVR, SGX544, 500MHz
● DDR3 1GB (option up to 2GB)
● LVDS 24 bits
● HDMI 1.4b, 4096 x 2048 Output
● RTL 8201F 10/100 fast ethernet PHY, BT, WLAN 802.11 b/g/n (optional)
● ATC2603 audio codec
● ALC105 for 3W internal audio AMP
● 8GB eMMC (option up to 32GB)
● PL2303RA x 4/ USB to Serial Bridge controller with RS232 Transceiver with 0V/ 5V/ 12V pin selection
● USB2.0 x2 / USB2.0 x1/ USB3.0 x1 (ADB/ADFU) / Internal USB x3 / 1x M.2 slot for SDIO/ UART interface / Wifi 802.11 b/g/n BT4.0 module / DC DIN 4 pin for 12V power adaptor x1 / Reset button x1 / RJ-45 10/100 Ethernet LAN x1 / USB 3.0/ USB 2.0 (rear panel) x1 / SD card slot x1 / HDMI x1 / ADFU button x1 / USB 2.0 (front panel) x2 / MIC in x1 / Line out x1 / Power button x1
● Power Jack Type: 1x 2x3 pin for Horizontal and Vertical type
● Power key/LED: 1x 1x2 pin power on/off, 1x 1x2 pin power LED
● I/O Headers: 1x 1x6 pins- I2C for touch, 4 x 2x5 pins- COM RS232, 1x 2x5 pins- UART Debug, 1x 2x5 pins- External IO connector from CPU, 2x 2x3 pins- COM power 0V (default)/ 5V/ 12V select, 1x 1x3 pins- IR receiver (optional), 1x 1x6 pins- cash drawer connector, 1x 1x3 pins- cash drawer power selection 12V(default)/ 24V
● USB: 1x 2x5 pins header for 2 USB port, 1x 2x5 pins header for 1 USB port
● Graphics: 1x 2x20LVDS Port (Dual Channel 18bits or 24bits), 1x 1x3 pins- panel power select: 3.3V(default)/5V, 1x 1x3 pins- Backlight Power Select: 5V(default)/12V, 1 x 8x1 pins- Backlight power connector, 1x 1x3 pins- Brightness control select: Digital (default)/Analog, 1x 1x3 pins- Analog brightness voltage: 3.3V / 5V(default) /12V
● Speaker: 1x 1x2 pin header for internal speaker Audio out JST 2.5mm x 2Pin
● RTC coin Battery: 1x CR2032
● DC 12V/ 4Pin power connector
● Operation Temperature: -10°C to 60°C
● Relative Humidity: 10% to 90% (non-condensing)
● OS Support: Linux 3.10, Android 5.0, Ubuntu 12, Debian, XBMC