SIGNAGE S500-SIGNAGE

Overview

The S500-SIGNAGE is a high performance, credit card sized computer. It is powered by ACTIONS semiconductor's 32-bit CPU that is designed to everything you'd expect a desktop computer to do, like software development, prototyping, playing high-definition video, or making spreadsheets. It also has the ability to be customized in all variety of specified application such as Internet of Thing (IOT) products, robotics, sensor hub, automation, and much more.

S500-SIGNAGE_01

S500-SIGNAGE_02

S500-SIGNAGE_03

S500-SIGNAGE_04

S500-SIGNAGE_05

Feature

● 145 x 105 mm SBC board
● Actions A9R4 CPU: QuadCore 1.6GHz, 28nm LP process, HP Imagination Power VR SDX544, up to 500 MHz
● DDR3 1GB (optional to 2GB)
● LVDS 24 bits dual channel
● HDMI 1.4b output, two blender and output path/ Max output 4096x2048
● RTL 8201F PhyLan support 10/100 Ethernet, RTL 8723BS customize module for BT,WLAN 802.11b/g/n (optional)
● ATC 2603 audio codec, ALC 105 for 3W internal audio AMP (optional)
● 8GB eMMC/ option up to 32GB
● PL2303RA x1 / USB to Serial Bridge controller with RS232 Transceiver COM Port RS232 x2 with 0V/5V/12V pin selector (optional)
● Front: USB2.0 x2
● Rear: USB2.0 x1 / USB3.0 x1 (ADB/ADFU) Internal USB x1
● NGFF slot for SDIO/ UART interface
● WiFi 802.1 b/g/n BT4.0 module
● DC DIN for 12V power adaptor x1, Reset button x1, RJ-45 10/100 Ethernet LAN x1, USB3.0 x1, USB2.0 from rear x1, SD Card reader slot x1, HDMI x1, USB2.0 from front x2, MIC in x1, Line out x1, power button x1
● Power key/LED Pin: 1x2pin ADC key x1, 1x2pin power on/off x1, 1x2pin power LED x1
● I/O Headers: 1x6pins- I2C for touch x1, 2x5pins- UART Debug x1, 2x5pins- External IO connector from CPU x1, 1x3pins- IR receiver (optional) x1, ADFU button x1
● USB: 2x5pins header for 1 USB port
● Graphics: 2x20LVDS Port (Dual Channel 18 bits or 24bits) x1, 1x3pins- Panel Power Select: 3.3V(default)/5V x1, 1x3pins- Backlight Power Select: 5V(default)/12V x1, 8x1 pins-Backlight power connector x1, 1x3 pins-Brightness control select: Digital (default)/Analog x1, 1x3pins- Analog brightness voltage: 3.3V/5V(default)/12V x1
● Speaker: 1x2pin header for internal speaker Audio out JST 2.5mm x 2Pin(Optional) x1
● Battery: CR2032 x1
● DC 12V power connector
● Operation Temperature: -10°C to 60°C
● Storage Temperature: -20°C to 70°C
● Relative Humidity: 10% to 90% (non-condensing)
● OS Support: Linux 3.10, Android 5.0, Ubuntu 12, Debian, XBMC